Yes Hybrid Uninc DCP 2022 - Men's Snowboard

On backorder
  • Overview
  • Available for Pre-Order ONLY!

    Estimated ship date: 8/21/21

    Pre-Orders may be cancelled anytime for no extra charge!

Specifications

Ability Advanced-Expert
Camber Profile Directional CamRock 1-4-1
Flex Stiff
Shape Directional
Terrain Freeride, Powder
Core Poplar / Paulownia / Bamboo
Laminates/Additives Triax Fiberglass
Base Sintered
Warranty Limited Lifetime

Product details

David Carrier Porcheron (DCP) is greatly influenced by surfing, water culture and the exotic wildlife of the Costa Rican coast. He wanted his board to remind him of his second love every time he straps in. He chose the Hybrid because of its progressive shape and popularity amongst YES. fans. It has the «short and fat» surface-planing effect of the 420 and employs the Tapered UnderBite outline originally unveiled on the PYL. It’s floaty, it’s maneuverable with confident edge hold and it snaps out of turns with a ton of power. It’s DCP’s new favorite board.

Camber Profile 

Directional CamRock 1-4-1 – The response of camber with the floatability of rocker. By combining camber and rocker you allow the board to be both responsive and floaty. The camber is between your feet as a spring keeping your contact points on the ground as you go in and out of turns allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more allowing it to float.

Flex

Flex Rating – 7/10 (1=Soft,10=Stiff)

Shape

Tapered UnderBite – More floatation and total edge control. Similar looking to “wings” or channels on a surfboard, it functions a little different on snow. Each side of the board’s effective edge is segmented into 3 distinct parts that step horizontally inward rather than tapering. Traditional “tapered boards” take the full sidecut and pull the tail inward, which is away from the arc of your turn – this is why they tend to wash out under hard carving. Tapered UnderBite corrects this by increasing the sidecut depth as you move towards the tail creating a corrective “hook” to the taper. The board blends into turns effortlessly, and has the directional drive and float you’d expect from a tapered board.

Core

Poplar / Paulownia / Bamboo – Creates a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.

Laminates

Glass – Triax & XPIC 202 On Tail

Base

Sintered True – Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.

Binding Compatibility

2 x 4 Insert Pack

Board Size Chart
Size (cm) 153 157
Effective Edge (mm) 1161 1195
Tip Width (mm) 310 316
Waist Width (mm) 260 264
Tail Width (mm) 302 308
Sidecut Radius (m) 7.4 ​/ 6.4 ​/ 5.4 7.6 ​/ 6.6 ​/ 5.6
Stance Setback (in) 4 4
Stance Range (in) 21.4 - 24.6 21.4 - 24.6
Rider Weight (lbs) 140 - 190 150 - 190