|Camber Profile||Tapered Directional Hybrid Camber|
|Terrain||All Mountain, Freeride, Powder|
|Laminates/Additives||Carbon Infused Glass, Carbon Stringers, Impact Plates|
The SUPERPIG infuses high-end tech into Ride's best-selling WARPIG shape for an elite all-mountain deck. If you find yourself seeking out something big and bad, avoid the other pigs and take shelter with the SUPERPIG, because this board is built like a brick shithouse. The SUPERPIG is the same shape as the WARPIG, just with a lot more tech and a little bit of camber. Size the SUPERPIG down 6 to 10cm’s from your standard size because of its innovative shape. The SUPERPIG rides like a very angry WARPIG. This board is made for the demanding rider that wants the aggressive thrash style of the WARPIG with camber and a little more stiffness. Don't let the shape fool you—this board will go anywhere and do anything. Of course, it will still ride powder with its short, wide shape, but you'll be really impressed at how fast the SUPERPIG goes from edge to edge on hardpack and the pop the camber provides. A Tapered Bi-Radial Sidecut maximizes grip and maintains speed in all conditions. Carbon Infused Glass provides extra pop and new Carbon Slim Walls reduce weight, increase damping, and increases energy transfer to enhance response and stability. Carbon Array 5™ provides extra pop without adding stiffness while the low friction Race Base is made from a carbon-infused sintered base material to ensure a fast ride.
Tapered Directional Hybrid Camber – A directional shape with a hybrid profile that has more camber than rocker.
Response – Aggressive
Tapered Bi-Radial Sidecut – Combining a tight radius at the tip to provide quick, effortless turn initiation, with a wide radius at the tail to support a smooth and stable turn exit, this sidecut design maximizes grip while minimizing any loss of speed.
Performance™ Core – High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.
Carbon Array™ 5 – This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control.
Carbon Infused Glass – 90° carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.
Double Impact Plates – Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most.
Carbon Slimwalls® – This sidewall construction consists of carbon and regular slimwall material combined and strategically placed at the inserts out to the contact points in the tip and tail on a twin, and the back inserts to the contact points in the tail on a directional board. This moves pop to the outside edges, enhancing stability and response.
Sintered Low Friction Race Base
Cleave Edge™ Steel – Nearly 50% more steel delivers unmatched resistance to edge cracking and can be detuned to larger radii.
Topless Construction – By transferring graphics directly to the fiberglass, Topless Construction removes the need to have any topsheet material. This process improves overall durability and reduces weight.
2 x 4 Inserts
Board Size Chart
|Effective Edge (mm)||1095||1121||1146||1171|
|Tip Width (mm)||311||316||321||328|
|Waist Width (mm)||260||265||270||277|
|Tail Width (mm)||301||306||311||318|
|Sidecut Radius (m)||5.1 / 6.2||5.4 / 6.5||5.6 / 6.9||5.9 / 7.2|
|Stance Setback (in)||0||0||0||0|
|Stance Range (mm)||533||559||559||584|
|Rider Weight (lbs)||100 - 175||130 - 190||140 - 200||170 - 220+|