Specifications
Fit | Regular |
Waterproof Rating | 10k |
Breathabilty | 10k |
Insulation | Thinsulate™ - 80g |
Material | Polyester |
Length | Hip-Length |
Hood Type | Fixed |
Powder Skirt | Removable |
Seam Sealing | Critically Taped |
Warranty | 1 Year |
Product details
Seasonal color and camo blocking, the Texture Jacket has 10K/10K waterproofing & breathability on dobby stretch fabric supported by non-bulky Thinsulate™ insulation with O'Neill Firewall Magma lining, critically taped seams and ergonomic shaping. With all the features for a full day on the hill and slick enough for your city life too, simply detach the snow gaiter.
Face Fabric
100% Polyester Dobby
O’Neill Hyperdry Treatment – O’Neill Hyperdry is a hydrophobic nano-technology durable water repellency treatment that allows fabric to dry ultra-fast and repel water while maintaining breathability and natural softness.
Membrane
10K Waterproofing / 10K Breathability
Insulation
3M Thinsulate™ Insulation | 80g / 60g – Thinsulate™ has a dense structure of very thin (~ 15 micrometers) fibers that provides warmth without thickness.
Lining Material
Firewall Magma – A breathable and moisture wicking liner that will make you stay out longer. Firewall Magma uses a thermal energy-absorbing pattern that absorbs and retains more body heat than a conventional lining, printed on the inside of the jacket to insure you keep your core warm.
Fit
Regular Fit
Center Back Length – 33" (L)
Ergonomic Shaped Pattern – Ergonomically curved seams for maximum freedom of movement.
Bottom Adjustment
Pockets
Goggle Pocket
Lift Pass Pocket – Keep your lift pass safely in its pocket. The pocket is always positioned on your left underarm to scan your lift pass with ease at the automatic access control gates.
Vents
Side Venting – Adjustable temperature control where you need it the most. Simply unzip to increase ventilation.
Additional Features
Detachable Snow Gaiter – The barrier between the snow and your body when you take a tumble. This piece of fabric is found at the bottom hem inside the jacket with press buttons to seal it and stop snow getting in.
Wrist Gaiters – A stretchy piece of fabric at the end of the arm cuff which you can put your hands in to stop snow going down your sleeve.
Non-Elasticated Cuff Adjusters – Helps keep chills from going up the sleeves.
Belt Connector Jacket-to-Pant Interface – The connector lets you connect the pants snow gaiter to the jacket at the front as well as the rear and the sides. Just loop your belt through and away you go.
Inner Storm Placket – Covers the zipper from the inside to keep moisture and the cold air out. A protective flap of fabric which sits in the front of the jacket behind the zip to stop cold winds getting into your jacket.
Critically Taped Seams – In order to make an outerwear garment waterproof, you need more than waterproof fabrics - you also need taped seams. A simple seam becomes a taped seam once waterproof taping has been carefully and firmly placed over a stitched seam. Critically taped seams means that only the seams in critical, exposed areas are taped.