|Insulation||Thinsulate™ - 80g|
|Material||Polyester, Recycled Polyester|
|Seam Sealing||Critically Taped|
The Quartzite Jacket offers 10K/10K waterproofing & breathability and mid level Thinsulate™ insulation. O’Neill Firewall Magma technology keeps warmth in all the right places while underarm vents let you take control when the pace steps up. Critically taped seams, wrist gaiter with thumbholes, ski pass pocket and hand pockets make life comfy while the aesthetically designed colour blocked options and fixed hood with inside collar make it look good.
50% Recycled Polyester / 50% Polyester
O’Neill Hyperdry Treatment – O’Neill Hyperdry is a hydrophobic nano-technology durable water repellency treatment that allows fabric to dry ultra-fast and repel water while maintaining breathability and natural softness.
10K Waterproofing / 10K Breathability
3M Thinsulate™ Insulation | 80g / 60g – Thinsulate™ has a dense structure of very thin (~ 15 micrometers) fibers that provides warmth without thickness.
Firewall Magma – A breathable and moisture wicking liner that will make you stay out longer. Firewall Magma uses a thermal energy-absorbing pattern that absorbs and retains more body heat than a conventional lining, printed on the inside of the jacket to insure you keep your core warm.
Center Back Length – 33" (L)
Ergonomic Shaped Pattern – Ergonomically curved seams for maximum freedom of movement.
Lift Pass Pocket – Keep your lift pass safely in its pocket. The pocket is always positioned on your left underarm to scan your lift pass with ease at the automatic access control gates.
Chest audio pocket - Stash your music device here for easy access to your tunes.
Side Venting – Adjustable temperature control where you need it the most. Simply unzip to increase ventilation.
Snow Gaiter – The barrier between the snow and your body when you take a tumble. This piece of fabric is found at the bottom hem inside the jacket with press buttons to seal it and stop snow getting in.
Wrist Gaiters with Thumbhole – A stretchy piece of fabric at the end of the arm cuff which you can put your hands in to stop snow going down your sleeve.
Non-Elasticated Cuff Adjusters – Helps keep chills from going up the sleeves.
Belt Connector Jacket-to-Pant Interface – The connector lets you connect the pants snow gaiter to the jacket at the front as well as the rear and the sides. Just loop your belt through and away you go.
Inner Storm Placket – Covers the zipper from the inside to keep moisture and the cold air out. A protective flap of fabric which sits in the front of the jacket behind the zip to stop cold winds getting into your jacket.
Critically Taped Seams – In order to make an outerwear garment waterproof, you need more than waterproof fabrics - you also need taped seams. A simple seam becomes a taped seam once waterproof taping has been carefully and firmly placed over a stitched seam. Critically taped seams means that only the seams in critical, exposed areas are taped.