|Insulation||Thinsulate™ - 120g|
|Material||Polyester, Recycled Polyester|
|Seam Sealing||Critically Taped|
The beautiful colorways and impressive tech spec is what helps the Coral Jacket be a bestseller. 10K/10K waterproofing & breathability, O’Neill Hyperdry water repellency coating, mid level warmth Thinsulate™ insulation with a thermo-regulating lining which can absorb and retain your warmth, soft teddy fur at the collar, critically taped seams and vents under the arms. All this on 50% recycled REPREVE® fabric, with added stretch and a cut designed for your freedom of movement. Further must-have features include goggle, liftpass and chest pocket, gaiters, belt connectors and a detachable hood.
50% Recycled Polyester / 50% Polyester Stretch
O’Neill Hyperdry Treatment – O’Neill Hyperdry is a hydrophobic nano-technology durable water repellency treatment that allows fabric to dry ultra-fast and repel water while maintaining breathability and natural softness.
10K Waterproofing / 10K Breathability
120g / 100g 3M Thinsulate™ Insulation – Thinsulate™ has a dense structure of very thin (~ 15 micrometers) fibers that provides warmth without thickness.
Firewall Magma – A breathable and moisture wicking liner that will make you stay out longer. Firewall Magma uses a thermal energy-absorbing pattern that absorbs and retains more body heat than a conventional lining, printed on the inside of the jacket to insure you keep your core warm.
Ergonomic Shaped Pattern – Ergonomically curved seams for maximum freedom of movement.
Center Back Length – 28"
Lift Pass Pocket – Keep your lift pass safely in its pocket. The pocket is always positioned on your left underarm to scan your lift pass with ease at the automatic access control gates.
Critically Taped Seams – In order to make an outerwear garment waterproof, you need more than waterproof fabrics - you also need taped seams. A simple seam becomes a taped seam once waterproof taping has been carefully and firmly placed over a stitched seam. Critically taped seams means that only the seams in critical, exposed areas are taped.
Snow Gaiter – The barrier between the snow and your body when you take a tumble. This piece of fabric is found at the bottom hem inside the jacket with press buttons to seal it and stop snow getting in.
Wrist Gaiters – A stretchy piece of fabric at the end of the arm cuff which you can put your hands in to stop snow going down your sleeve.
Non-Elasticated Cuff Adjusters – Helps keep chills from going up the sleeves.
Belt Connector Jacket-to-Pant Interface – The connector lets you connect the pants snow gaiter to the jacket at the front as well as the rear and the sides. Just loop your belt through and away you go.
Storm Placket – Covers the zipper to keep moisture and the cold air out. A protective flap of fabric which sits in front of the jacket over the zip to stop cold winds getting into your jacket.
Chinguard Protector – A protective piece of comfortable fabric to keep the zip soft and cozy against your chin and avoid rash.
Detachable Hood Button