|Insulation||Synthetic - 120g|
|Material||Polyester, Recycled Polyester|
|Seam Sealing||Critically Taped|
Clean lines, longer, on-trend length, fixed hood, low key branding and a shape built for movement, the Apo Jacket looks good. 50% recycled outer and recycled insulation, it is part of our O’Neill Blue collection and it does good too. Add our technology, Durable Water Repellency, 10K/10K waterproofing & breathability, thermo-regulating lining, which reflects your warmth back to you, placed where it’s needed most, critically taped seams, underarm vents, and all the pockets, connects and gaiters you would expect, it’s not just good, it’s great.
50% Recycled Polyester / 50% Polyester
O’Neill Hyperdry Treatment – O’Neill Hyperdry is a hydrophobic nano-technology durable water repellency treatment that allows fabric to dry ultra-fast and repel water while maintaining breathability and natural softness.
4 Way Stretch Fabric
10K Waterproofing / 10K Breathability
120g / 100g O'Neill Blue Insulation - O'Neill's mid level insulation.
Firewall Magma – A breathable and moisture wicking liner that will make you stay out longer. Firewall Magma uses a thermal energy-absorbing pattern that absorbs and retains more body heat than a conventional lining, printed on the inside of the jacket to insure you keep your core warm.
Ergonomic Shaped Pattern – Ergonomically curved seams for maximum freedom of movement.
Center Back Length – 31"
Lift Pass Pocket – Keep your lift pass safely in its pocket. The pocket is always positioned on your left underarm to scan your lift pass with ease at the automatic access control gates.
Critically Taped Seams – In order to make an outerwear garment waterproof, you need more than waterproof fabrics - you also need taped seams. A simple seam becomes a taped seam once waterproof taping has been carefully and firmly placed over a stitched seam. Critically taped seams means that only the seams in critical, exposed areas are taped.
Snow Gaiter – The barrier between the snow and your body when you take a tumble. This piece of fabric is found at the bottom hem inside the jacket with press buttons to seal it and stop snow getting in.
Wrist Gaiters – A stretchy piece of fabric at the end of the arm cuff which you can put your hands in to stop snow going down your sleeve.
Non-Elasticated Cuff Adjusters – Helps keep chills from going up the sleeves.
Belt Connector Jacket-to-Pant Interface – The connector lets you connect the pants snow gaiter to the jacket at the front as well as the rear and the sides. Just loop your belt through and away you go.
Storm Placket – Covers the zipper to keep moisture and the cold air out. A protective flap of fabric which sits in front of the jacket over the zip to stop cold winds getting into your jacket.
Chinguard Protector – A protective piece of comfortable fabric to keep the zip soft and cozy against your chin and avoid rash.
Fixed Hood with Adjusters.