|Camber Profile||Park V1 Profile - Camber|
|Terrain||Park, All Mountain Freestyle|
|Laminates/Additives||Triax/Biax Fiberglass, Flax|
As a CAPiTA team favorite, The Outsiders crushes park jumps, side hits, and freestyle features around the globe. With a revolutionary camber configuration featuring small zero-camber sections integrated into specific sidecut blend zones near the tip and tail, you can enjoy the pop and power of traditional camber with unmatched stability at high speeds. For 2022, the superpowers of The Outsiders just got supercharged. With an all-new Hover Core™, an upgraded HyperDrive™ sintered base, and two new wide sizes to choose from—The Outsiders maximizes the speed and power possible from a lightweight and energetic board.
Park V1 Profile – The PARK V1 camber configuration zeros out a traditional camber approach 4 cm before the end of the sidecut. The small zero camber sections provide a more controlled ride while retaining the response and power of a cambered board.
Flex Rating – 6/10 (1=Soft,10=Stiff)
Radial Sidecut – A RADIAL sidecut is a single radius design that allows your board to start and finish a turn on the same arc.
Hover Core - The Hover Core is so light it essentially floats across the snow. Thin cut, low-density, Paulownia strips are combined with 7mm Poplar beams to create an ultralight and intensive response in The Outsiders.
Technora™ + Flax Boosters – With an excellent tensile strength and fatigue resistance, Technora™ is an aramid fiber that functions as a shock absorber and energy source when integrated into a snowboard construction layup. CAPiTA has interwoven Technora™ with an extremely lightweight and all-natural Flax fiber to invigorate every construction combination with maximum turning and ollie power.
Holysheet™ Fiberglass – The HOLYSHEET™ fiberglass configuration features fiber weaves with a high tensile strength and low modulus of elasticity. With a higher roving count in the same weight of glass, you can have a stronger and more responsive board without adding extra weight. It features Triaxial fiberglass on top of the core and Biaxial fiberglass beneath, creating a perfectly blended ride while increasing strength and durability.
Magic Bean Resin – Developed over a three-year span, this advanced resin system has a bio-content of 60% renewable, agricultural raw material. It is plant based that does not compete with primary food sources and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. This resin system is poppy, powerful, and extremely durable. MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. The focus is to save wood core weight by increasing resin performance. This means you get a lighter board while achieving higher energy return.
Full ABS1000 Sidewalls
Hyperdrive Drive Base - Exclusively formulated, sintered, ultra-high molecular weight, ultra-high density polyethylene, custom engineered with special additives. Rated for the most depraved speed junkies ONLY.
360 Degree HRC48 Steel Edges
PLT™ Topsheet Technology – PLT™ technology is exclusive to CAPiTA MFG and magically bonds the topsheet to an already pressed snowboard.
PAM16000™ Topsheet with Metallic Underlay
Multitech™ Level 4 DeepSpace™ Silkscreen – The DEEPSPACE™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.
Sublimation Base Graphic
Stainless Steel 4 x 2 Inserts
Board Size Chart
|Effective Edge (mm)||1187||1222|
|Tip Width (mm)||297||299|
|Waist Width (mm)||254||255|
|Tail Width (mm)||297||299|
|Sidecut Radius (m)||8.0||8.1|
|Stance Range (in)||25||25|
|Stance Range (mm)||635||635|
|Rider Weight (lbs)||120-180||130-190|