|Camber Profile||Low Camber + Jib 3BT|
|Laminates/Additives||Biax Fiberglass, Carbon|
Since it burst on the scene a couple of years ago, the Wallie has inspired a generation of riders to see legit new lines in the park and street. The skate-inspired tips feature a steeper kick, so you can smash them over obstacles, press through gnarlier kinks and jam the board up walls and polls. Combined with a wide, stable centerbase and subtle uplift at the wide points to minimise hang-ups, you’ll have never felt so confident on the run-in. Make scorpions a thing of the past.
JIB 3BT™ – 3rd generation JIB 3BT™ featuring SideKick™ is tuned with a wide centerbase and the shortest section of sidebase uplift in the line. The uplift angle is low and begins outside the bindings for precision control with less hangups. The wide centerbase offers a stable platform to press, load up ollies and put down landings. Perfect for urban, jib, and park driven riders.
Flex Rating – 3/10
SideKick™ – SideKick™ dramatically increases the sidebase uplift just outside the widest points of the nose and tail. This makes turn initiation smoother, increases float in powder and improves handling of the board in rough terrain.
Wallie Tips™ – Skate inspired, turned up twin tips.
Sidebase Uplift – Medium Tip Uplift / Medium Tail Uplift
Light Core - A 50-50 blend of Poplar and Paulownia woods for optimal strength to weight propertie.
Biax Laminate – Traditional and time tested two-way weave of fiberglass is light, strong, and responsive keeping the board snappy without adding torsional stiffness.
Carbon Stringers – Carbon is feather light and adds explosive pop, precise edge control, reactive response, and smooth dampening to a board. It is used in different ways to fine-tune a boards ride characteristics.
Central Super Tube – One centrally placed hollow carbon rod milled into the bottom of the core to enhance pop without stiffening the board torsionally.
ABS Solid Walls – Tried and trusted ABS sidewalls for the best flex to strength ratio.
Super Slick X – Not a basic extruded base. It has the highest molecular content available for an extruded base. That means it's super slick, durable and maintenance-free.
2x4 Insert Pattern
Board Size Chart
|Effective Edge (mm)||1097||1118||1140||1140|
|Tip Width (mm)||288||291||293||303|
|Waist Width (mm)||250||251||253||264|
|Tail Width (mm)||288||291||293||303|
|Sidecut Radius (m)||7.6||7.6||7.7||8|
|Stance Setback (mm)||0||0||0||0|
|Stance Range (mm)||510-590||520-600||530-610||535-615|